Homeowners across the country add fences to their property for a variety of reasons. They will not only add a level of security but a fence can also make a yard look more appealing and cozy.
While fences are a common sight throughout most neighborhoods, getting them set up isn’t always a straightforward matter. There is a lot of technical skill involved to get everything set up just right. Since they are such an investment, you’ll want to do everything you can to help your fence lasts for years to come.
To help you make your project as successful as possible, here are the top seven fence installation mistakes to try to avoid.
1. Incorrect Measurements
When you’re building a fence there’s going to be a lot of math involved and it all starts with measuring out the fence line. This step sounds easy and straightforward but is a common way things go awry.
The first step for measuring correct is to use the right tools. Many people find the most success by using stakes at the corners and where the posts will be. From there they add a string to those stakes and then using a walking measuring tape wheel to get the most accurate read.
Getting the right measurements will help you determine your fence installation budget and ensure that you get enough materials to finish the job.
2. Following the Wrong Property Lines
In order to get the right measurements the first time, you’ll need to know exactly where your property lines are. There would be nothing worse than building a fence only to have to tear it down because it crossed into your neighbor’s land.
Even if you think it’s obvious where your yard ends and the neighbors begins, sometimes those lines have been blurred over time and you’re not actually correct. It’s always worth the little time and effort to get confirmation to get the job done right. This can be done through the county’s office where they keep maps and records of all property lines within their boundaries.
3. Missing Utility Lines
Even if you find the correct property lines and know where you want to build your fence, it might not work there. Underneath the grass of any yard, there are multiple utility lines, so you have to make sure you avoid those when placing your posts.
These utility lines include plumbing, electric, and gas lines. If they get punctured or damaged by the fence installation equipment, you could have serious problems that affect not only you but your neighbors as well. Luckily, the Call 811 program makes this process much easier by locating all of the underground lines and marking them for you.
After you’ve had this done you can make a plan for where your fence can actually be located.
4. Insecure Posts
The planning and preparing steps are critical when installing a new fence, they’ll make or break a project. But there are some common mistakes made during the actual installation as well. Starting with leaving insecure fence posts.
While our eyes focus on the pickets of a fence, the posts are the backbone and make the whole structure sound.
Often the hole for the post isn’t dug down far enough so there can’t be a solid foundation made. As the posts are placed there should be some kind of dense material used to hold them in place, either soil or concrete. An easy test to run is to pull on the post to see if there is any wiggle room, if not the job is done right!
5. Using Low-Quality Materials
There are several different types of fences you can choose from; wood, vinyl, or chain link being the ones you see the most often. Each one has its benefits and all will be a good choice if you use quality materials.
No matter what you choose, it’s going to be an investment into your property. In order to get the most from your investment, you need to use materials that will withstand the test of time by looking and functioning well for years to come. Opting for the poorly made pickets can lead to you doing the whole project over again sooner than necessary.
6. Mis-Aligning Gates
Typically, when there’s a fence there’s a gate as well. They add another level of functionality to a fence and help you get the most use out of your property, even when closed off by a fence.
While extremely useful, they can also be the source of much frustration when building.
Many people don’t take the time to figure out how to hang the gate correctly so that it swings easily and freely. This can lead to frustrating use and eventually avoiding it altogether, which would be such a waste!
7. Attempting to DIY
Since they are so common, most people think they can handle a fence installation all on their own. But there’s actually a lot of technical skill needed and attempting without it can be a big mistake.
In order to avoid the issue of taking on more than you can handle, it’s a good idea to look into fence companies. Chances are you’ll find one that can get the job done much quicker and more efficiently than you’d be able to. You can simply enjoy the newly built fence without any of the hassles of preparing or installing it!
Fence Installation Mistakes to Avoid
When you’re able to avoid all of these fence installation mistakes, you’ll have greater confidence in the project. The fence will do its job of keeping things you don’t want out and the things you do want in. And it will look great for years to come as well!
Having a beautiful and functional yard can be a huge source of happiness. It allows you to enjoy the outdoors and great weather, all while feeling safe and secure. A great fence will play a huge role in those special times and help you love your home and property even more!
If you’re interested in getting more information about yard maintenance, check out our other articles today!